Page 2
Competitions, and proven on the Street to information and a copy of the original sales receipt to deliver the ultimate in low bass output, Kicker for validation of warranty repairs. durability and outrageous SPL. ALWAYS KEEP YOUR RECEIPT! ™...
Page 3
Features Sleeved High-Power Tinsel Lead Wires eliminate broken leads and power loss, due to the common use of ™ Vacuum Formed Polymineral Cone with ISD “insufficient-gauge” lead wires. (Inverted Structural Dome) is a high performance Spring-Loaded Nickel Plated Terminals flawlessly composite, which remains rigid, minimizes cone flex and lowers connect medium to heavy gauge speaker wire to the harmonic distortion.
Page 4
Performance Model: DC10 DC12 TC10 Nominal Impedance [Zn], ohm 2 or 4 2 or 4 [per enclosure] Resonance Frequency [fb or fo], Hz Sensitivity [SPLo], dB @ 1W, 1m 98.4 99.9 93.8 ™ Effective Excursion [EXmax ], in (mm) .38 (9.76) .38 (9.76) .38 (9.76) Power Handling Watts, Peak (RMS)
Page 5
Figure A. vehicle must be used. Note: To get the best performance from your Comp Subwoofer Enclosure, we recommend using genuine Kicker Accessories and Wiring. Comp Subwoofer Enclosures...
Page 6
Floor Board impedance. Make sure your amplifier can drive this load. All specifications and performance figures are subject to change. Please visit kicker.com for the most current information. Comp Subwoofer Enclosures...
Page 7
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, can be obtained by writing, calling, or by visiting kicker.com. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal.
Need help?
Do you have a question about the Comp DC12 and is the answer not in the manual?
Questions and answers