Download Print this page
Kicker Solo-Baric S1L7 Owner's Manual
Kicker Solo-Baric S1L7 Owner's Manual

Kicker Solo-Baric S1L7 Owner's Manual

Solo-baric s7 series

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the Solo-Baric S1L7 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kicker Solo-Baric S1L7

  • Page 2 Kicker to unmatched durability. validate your warranty. ALWAYS KEEP YOUR RECEIPT! Thanks for buying KICKER.
  • Page 3 Chromed One Piece Uniplate™ with Vented Features Hyper-Extended Poles Aluminium Deposit Impregnated Cone An Ultra High Performance look that is more rigid for less cone flex and 1. Provides enhanced heat transfer for cool operation and less distortion. maximum power handling. Rear cone brace For added strength to reduce cone flex OK Reduces non-linear magnetic fields around the voice coil under stress.
  • Page 4 Performance Model Max amp Sensitivity Voice Xmax Mounting Outer Mounting Power Coil Cutout Flange Depth (watts) (dB 1w/1m) (in./mm) (in./mm) (in./cm) (in./cm) (in./cm) S15L7 1000 88.5 14.1 x 14.1 15.6 x 15.6 63.5 16.3 35.81 x 35.81 39.6 x 39.6 20.8 87.4 11.2 x 11.2...
  • Page 5: Wiring Options

    Wiring Options Cutout Dimensions Solo-Baric L7 woofers are available with dual 2 Ohm or dual 4 Ohm voice coils. Both coils should always be hooked up. The dual 2 Ohm woofer will give you a 1 Ohm or a 4 Ohm load depending on if the coils are wired in parallel or in series.
  • Page 6 Kicker recommends using a good grade of wood glue and Box Building Notes silicone sealer for an airtight box. The cardboard support inside your Solo-Baric’s shipping Note: If you prefer an ultra-smooth bass response, you should carton can be used as a template for cutting the speaker loosely fill your Solo-Baric Enclosure with polyfil.
  • Page 7: Recommended Enclosures

    Solo-Baric L7-Series Sealed Enclosure Applications The Kicker Solo-Baric L7 is designed to give more output than an equivalent round speaker and is amazing when used in the recommended sealed boxes. These sealed enclosure recommendations will give the smoothest response with the most energy at really low frequencies, around 20 to 30 Hz.
  • Page 8 Panel dimensions for minimum recommended enclosures: Model Volume (cu.ft.) Panel A Panel B Panel C S8L7 0.33 10” x 10” 10” x 8” 8” x 8.5” S10L7 0.66 12” x 12” 12” x 10.5” 10.5” x 10.5” 1 inch = 2.54cm S12L7 0.88 13”...
  • Page 9 Recommended Ported Enclosures – High Efficiency Model Compact Street Bass SPL / Deep Bass S8L7 .66 cu.ft. + port; .8 cu.ft. + port; 1.0 cu.ft. + port; 1.5x9.5" port, 19.25" long 1.75x9.5" port, 19.75" long 2x9.5" port, 21.25" long Power Handling = 300W Power Handling = 325W Power Handling = 325W S10L7...
  • Page 10 Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, can be obtained by writing, calling, or by visiting kicker.com. You can confirm that a dealer is authorized by asking to see a current authorized dealer window decal.
  • Page 11 Notes Tech Lines Solobaric L7 Subwoofers...