Janome Magnolia 7034D Instruction Book page 22

3
5
4
6
5 6 7
3. Insert the thread between tension discs from the
3
4. Turn the handwheel toward you to bring the
4
5. Pass the thread through the needle thread guide
6. Pass it through the needle bar thread guide from
7. Thread the right needle from front to back and
7
8
right. Then pull both sides of thread.
3
Right needle thread tension dial
needle bar to its highest position, then pass the
thread through the right needle thread guide and
the thread take-up lever cover.
4
Right needle thread guide
5
Thread take-up lever cover
sliding the thread from left to right.
left to right.
pull the thread about 10 cm (4˝) from the eye of
the needle to the back.
6
Needle thread guide
7
Needle bar thread guide
8
Right needle
21