Enhancing Your System - Sharp CD-XP350W Operation Manual

Enhancing your system

CD-XP350W
ENGLISH
The connection lead is not included. Purchase a commercially available lead as
shown below.
Red White
E-27
Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
To the line
2
output sockets
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
White
Red 4
Play the connected equipment.
Note:
To prevent hum interference, place this unit away from a television.
To record on a tape
1
RCA lead
Insert a cassette in the TAPE 2 cassette compartment.
(not supplied)
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the
5
Play the VCR, DVD, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
) button.
( ) or ( T-2) button.
02/1/23 CD-XP350W(A)E4.fm