Listening To A Cassette Tape (Tape 1) - Sharp CD-XP350W Operation Manual

Listening to a cassette tape (TAPE 1)

CD-XP350W
ENGLISH
Before playback:
For playback, use normal or low-noise tapes for the best sound.
(Metal or CrO tapes are not recommended.)
Do not use C-120 tapes or poor-quality tapes, as they may cause mal-
functions.
Before loading a tape into the cassette compartment, tighten the slack
with a pen or a pencil.
E-19
Sound control (See page 12.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette door by pushing the area marked "
EJECT".
4
Load a cassette into the TAPE 1 cassette compartment with the
side to be played facing toward you.
5
Press the ( ) button to start playback.
To stop playback:
Press the button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 compartment.
02/1/23 CD-XP350W(A)E2.fm
PUSH