Changing The Keycode - Sharp Notevision XG-C50X Operation Manual

Setting the Anti-Theft
2
Enter the remaining 3 digits by
pressing any buttons you like.
3
Enter the same keycode once
more in "Reconfirm".
Note
• The Keylock function will become
temporarily disabled.
When "Anti-Theft" is set, the keycode
inputting box appears after the power
is turned on. When it appears, enter the
right keycode.
• Press the buttons on the remote control if
the buttons on the remote control are used
for setting the keycode. In the same manner,
press the buttons on the projector if the
buttons on the projector are used for setting
the keycode.

Changing the Keycode

• When "Anti-Theft" is selected, the password
input box is displayed. After the password has
been entered, you can change the keycode.
Select "Anti-Theft" in the "Options (2)"
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
1
Press the buttons on the re-
mote control or the projector
to enter the preset 4-digit
keycode in "Old Code".
2
Press any button you like on
the remote control or the pro-
jector to enter the new keycode.
3
Enter the same 4-digit keycode
in "Reconfirm".
Note
• If you do not want to set a keycode, leave
the keycode field blank in steps 2 and 3
and press .
-76 -76