Tv Set - Sharp 29H-FD1S Operation Manual

TV set

Bottom
9
POWER
POWER switch
Turns the main power
on and off.
6
Infrared sensor window
Receives the infrared wave
from the remote control.
28
28 COMFY VIEW indicator
Lights up red when the COMFY
VIEW is set to DARK, MID or LIGHT.
36 ON TIMER indicator
Lights up red when the On Timer is set.
9 STANDBY indicator
Power can be turned on by the remote
control when the indicator is lit red.
• Minimal electric power remains consumed if the TV is in standby mode.
Door
13
COMFY VIEW sensor
Room brightness sensor.
To open the door
Using the projection located under
the "PULL-OPEN" indication, pull
and lift the door open.
To close the door
Using the projection, lower the door
until closed.
Caution:
• When opening or closing the door,
do not insert your fingers into the
gap between the door and front
panel. This may result in an injury.
MENU/PRESET
MENU/PRESET button
Used for MENU setup.
Tunes the channels.
/
9
Volume up/down button
Adjust the volume.
Make adjustments in PRESET.
/
9
CH
Channel up/down button
Select the channels.
Tune or set the channels.
53
53 Video input terminal (AV-3)
Connects to a camcorder, video game, etc.
53
S-Video input terminal (SAV3)
Connects to a camcorder, video game, etc.
10
Headphone jack ( )
Used to listen to the audio with headphone.
(When using headphone, see
CH
Audio input terminals (AV-3)
Connects to a camcorder, video
game, etc.
10 .)
E 8