Sharp AR-M150 Online Manual page 22

3 SCAN
Scanning from a TWAIN-Compliant Application
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button (
The scanner driver setup screen will appear.
Scanner Driver Settings
5
In the "Scanning Position" menu, select the
location where you placed the original in Step 1.
If you placed a one-sided original in the SPF/RSPF,
select "SPF (Simplex)".
When using the RSPF:
If you placed a two-sided original in the RSPF, select
"SPF (Duplex-Book)" or "SPF (Duplex-Tablet)"
according to the binding position of the original.
If you selected "SPF (Duplex-Book)" or "SPF
Note
(Duplex-Tablet)" in the "Scanning Position" menu, select
whether the orientation of the placed original is "Right
Edge Fed First" or "Leading Edge Fed First".
CONTENTS
).
I N D E X
6
Click the "Preview" button.
The preview image will appear.
If the angle of the image is not correct, reset the
Note
original, and click the "Preview" button again.
If the preview image is not oriented correctly, click the
"Rotate" button in the preview screen. This rotates the
preview image 90 degrees clockwise, allowing you to
correct the orientation without resetting the original.
Preview screen
If you set multiple pages in the SPF/RSPF, the
machine previews only the top page of the originals,
and then sends it to the original exit area. Return the
previewed original to the SPF/RSPF before starting the
scanning job.
(part 2)
22