Direct Selection Of Tracks; Repeat Play - Sharp DV-SV92S(U) Operation Manual

Direct Selection of Tracks

Selecting by Time
You can play the audio CD starting from any desired time
point.
Press SEARCH MODE on the remote control during
playback.
The time search box is displayed on the screen as "GO
TO _ _ : _ _ / xx : xx".
Enter the time using number buttons.
The player jumps to the entered time of the current track.

NOTE:
• To cancel this operation, press RETURN.
Accessing Tracks Using Number Buttons
You can play any track you want, just by pressing the cor-
responding number buttons.
To enter a track number with more than one digit, press
+10 and then enter the two-digit track number.
If you attempt to enter a number greater than the total num-
ber of tracks on disc, " " is displayed on the screen.
Press REPEAT during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If "REP-ONE" is displayed, the current track will be played
again.
If "REP-ALL" is displayed, the whole disc will be played
again.
If "REPEAT OFF" is displayed, Repeat mode is disabled.

NOTE:
• If "REP-ALL" is selected and a playlist is active, the playlist
is repeated instead of the whole disc.
Repeating Sections between Two Specific Points
(A – B Repeat)
Press A-B during playback at the point where Repeat play
is to start (A).
"A TO B SET A" is displayed on the screen.
Press A-B again at the point where Repeat play is to end
(B).
"A TO B SET B" is displayed and Repeat play of the selec-
tion between points A and B starts.
To return to normal play:
Press A-B again. "A TO B CANCELLED" is displayed and
the A-B Repeat is disabled.

NOTE:
• To cancel this operation after entering point A, press
RETURN or C.
- 25 -

Repeat Play

EN