Sharp DV-RW370X Operation Manual page 93

Symptom
Some functions such as Stop,
Search, or Slow-motion Playback
cannot be performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
Angles cannot be changed.
Recording does not start
immediately after pressing
[DVD REC/OTR I].
Recording does not stop
immediately after you press
[STOP C].
The disc tray does not open when
you press
[OPEN/CLOSE EJECT A].
"Repairing" appears on the display.
Repairing
In a case you intend to cancel the
Repairing process.
Do you want to cancel a repairing process ?
When selecting "Yes", the disc may not be
usable.
Yes No
Repairing
Picture noise appears.
The unit does not play back the
tape.
Recording does not start
immediately after pressing
[VCR REC/OTR I].
The remote control does not
function.
The motor rotates even when
playback / recording is stopped.
* If the above remedies do not solve the problem, please call an authorised service centre.
Others
Troubleshooting (cont'd)
DVD
• Depending on the disc, you may not be able to perform some of those
operations. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD-Video, DVD-RW or DVD-R
being played back.
• The DVD-Video prohibits the changing of the language for the sound track.
• Try changing the language using the DVD-Video menu.
• Multilingual subtitles are not recorded on the DVD-Video.
• The DVD-Video prohibits changing the subtitles.
• Try changing the subtitles using the DVD-Video menu.
• You can change the angle only if the disc contains multi-angle scene. Angles
can be changed only when the multi-angle scene appears on the screen.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video menu.
• An unused DVD-RW or DVD-R was inserted. It takes a while for the unit to
automatically format a DVD-RW.
• It will take a few seconds for the unit to send data to disc before recording
can stop.
• It may take a few seconds for the disc tray to open after you have recorded or
edited a disc.
• This is because the unit is sending data to the disc.
• If a power failure occurs or the mains cable is unplugged during recording,
finalising, formatting or editing (even after "Wait for a moment." message
disappeared), a repairing process will begin automatically when the unit is
turned on next time. It may take several minutes up to about four hours.
• If you intend to cancel the Repairing process, press [OPEN/CLOSE EJECT A]
on the front panel, then select "Yes" with [Cursor s / B] and press [ENTER].
After that, the disc tray will automatically open. In case the Repairing
process is cancelled, the disc MAY NOT work.
VCR
• Adjust tracking control for better picture by pressing [PROG.
you are playing back a video tape.
• Head cleaning for VCR may be necessary.
Refer to "AUTO HEAD CLEANING" on page 4.
• No video tape is inserted.
• Make sure the video tape has a record tab when you record to a video tape. If
needed, cover the hole with cellophane tape.
• Check if a video tape is in the unit. Press [VCR]. Then, try again.
• Check if the Child Lock is activated. (See page 10.)
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
Remedy
/ ] while
EN 93