Table of Contents
Advertisement
Connection
Caution:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO lead (commerially available).
• Be sure to keep the Player connection leads separate from the TV aerial lead when you install the Player,
because it may cause electrical interference when you are watching television programmes.
Connecting a TV with AV 1 (TV) Output and AV 2 Input SCARTS
Use the SCART leads (one SCART lead: supplied) to connect the Player to your TV and VCR.
: Signal flow
Required leads
SCART lead (one SCART lead:
supplied)
SCART lead (the other SCART
lead: commercially available)
The factory default setting for the OUTPUT SELECTOR is "VIDEO". If your TV supports the higher quality
modes S-VIDEO or RGB via the SCART, then please set the selector for your preference.
Web-site:www.sharp.co.uk/support Help line:0990 274277 (office hours)
To AV 1 (TV)
SCART
AV 1 ( TV )
OUTPUT
S-VIDEO
AV 2
SELECTOR
OUT
S-VIDEO
RGB
VIDEO
Change the position according to
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV.
To AV 2
SCART
To SCART
input
DVD Player
VIDEO
OUT
DIGITAL
OPTICAL
L
OUT
DIGITAL OUT
AUDIO
OUT
R
SCART OUTPUT
To SCART
output
VCR
TV
15
GB
Advertisement
Table of Contents
