Sharp VL-Z900H-S Operation Manual page 94

Digital Still Camera Features
Camera Recording
Recording
1
Select the desired time lag.
2
Press the DISPLAY/MODE SET
button until the mode screen appears.
3
Press l or m on the Operation
button to select "SELF TIMER", then
press the center of the Operation
button.
• The self timer mode indicator, U
(10 SEC mode) or T (2 SEC
mode), appears.
Self timer mode indicator
A U T O
4
Press the PHOTO button to start the
self-timer.
• The self-timer operating indicator
flashes while the timer counts down.
A U T O
• The shutter automatically releases
after the time lag you selected, and a
still image of the subject is recorded.
82
M A N U A L S E T E X E C U T E
F O C U S
A U T O F O C U S
B L C / G A I N
[
1
10
NORMA L
C A N C E L
Self-timer operating indicator
[
1
10
NORMA L
To cancel the countdown
Press the PHOTO button in step 4.
To cancel the self-timer
Press the center of the Operation button
again in step 3.
Notes:
• When recording with the self-timer, stabilize
the camcorder in the horizontal plane by
attaching it to a tripod, etc.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 4 to record another
image with the self-timer.
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
]
2 8 0
/ 9 1 1
]
2 8 0
/ 9 1 1