Windbreak - Sharp ViewcamZ VL-Z3H Operation Manual

Useful Features
Camera Recording

Windbreak

Available mode:
Tape Camera
The windbreak function allows you to
reduce annoying noise from strong winds
when recording.
1
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears (see page 31).
2
Press l or m on the Operation
button to select "MENU", then press
the centre of the Operation button.
3
Press l or m to select "EXECUTE",
then press the centre of the Operation
button.
4
Press l or m to select Y, then
press the centre of the Operation
button.
5
Press l or m to select "WIND", then
press the centre of the Operation
button.
S E T T I N G 2
D I S
1 6 9
A UD I O MOD E
W I N D
R E T U R N
6
Press l or m to select "ON", then
press the centre of the Operation
button.
W I ND
7
Press the DISPLAY button to turn off
the menu screen.
44
:
O F F
ON
ON
To cancel Windbreak
Select "OFF" in step 6 above.
Note:
• Keep the windbreak function off during
normal recording. If left on, the recorded
audio may sound somewhat muffled when
played back.