Sharp MD-MT88H Operation Manual page 51

ERROR MES-
SAGES
z Poor connection of the digital cable.
NO SIGNAL
z No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z The input signal has improper sam-
pling frequency.
z You tried to play back a track that can-
NOT PLAY
not be played with this equipment.
z You recorded on a playback-only disc.
PLAY MD
z Improper power is being supplied.
POWER ?
z The write protection tab of a MiniDisc
PROTECTED
is set to the protected position.
z You tried to record on a playback-only
disc.
z Since a track number is currently be-
SORRY
ing located or updated, the unit cannot
accept your command.
(Wait for a whilst and try the operation
again.)
MEANING ERROR MES-
SAGES
z The temperature is too high.
TEMP OVER
(Turn off the power, and wait for a whilst.)
z There is an error in the recording sig-
TOC FORM
(**) nal.
(Erase all of the tracks, and then record
again.)
z There is no space left for recording
TOC FULL
character information (track names,
disc names, etc.).
z The track has been protected from be-
Tr. Protect
ing erased.
(Edit the track with the device on which it
was recorded.)
z A disc which contains data other than
? DISC
music was played.
(A disc which contains nonmusic data
cannot be played.)
z There is an error in the signal recorded
on the disc.
Number or symbol appears in (*) position.
MEANING
ENGLISH
E-44