Table of Contents
Advertisement
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or
service centre.
PROBLEM
The unit does not
Is the AC adaptor disconnected?
turn on.
Is the battery exhausted?
Is the unit in the hold mode?
Has condensation formed inside the
unit?
Is the unit being influenced by me-
chanical shock or by static electricity?
Is the volume set too low?
No
sound
is
Is the remote control unit or the ear-
heard from the
earphones.
phones plugged in?
Are you trying to play a MiniDisc with data
on it instead of a MiniDisc containing
music?
When the opera-
Is the unit in the hold mode?
tion buttons are
Is the battery exhausted?
pressed, the unit
Is the remote control unit plug or the
does not respond.
earphones plug inserted firmly?
Some
sounds
Is the battery exhausted?
are skipped.
Is the unit being subjected to exces-
sive vibration?
E-49
PROBLEM
CAUSE
The MiniDisc can-
not be ejected.
Recording and
editing are im-
possible.
The battery cannot
be charged.
Nothing appears
on the remote
control display.
CAUSE
Has the track number or character
information been updated on the disc
yet?
Is the unit in the recording or editing
mode?
Is the MiniDisc protected against ac-
cidental erasure?
Is the unit connected properly to the
other equipment?
Is the AC adaptor unplugged or did a
power failure occur whilst recording or
editing?
Is the unit in the hold mode?
Is an optical signal being output from
the stereo system?
Read the operation manual for the
stereo system.
Is the select switch for charging/
operation set on the charging side?
Is the socket clean?
Is the remote control display set to
"LIGHT OFF"?
Advertisement
Table of Contents
Troubleshooting
