General Control; Extra Bass Indicator - Sharp XL-UH25H Operation Manual

Table of Contents

Advertisement

General control

XL-UH25H
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Display brightness control
To dim the display brightness, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more during power on.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
12
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Extra bass control (X-BASS)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control.
Bass control
1. Press the BASS/TREBLE button to select "BASS".
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.
Treble control
1. Press the BASS/TREBLE button to select "TREBLE".
2. Within 5 seconds, press the VOLUME (+ or –) button to adjust the
treble.
Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
CD
AUDIO IN
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
MIN .....
30 MAX
-3
+3
-3
+3
TUNER
USB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-uh25h

Table of Contents