Computer Image Adjustment ("Fine Sync" Menu); Adjusting The Computer Image; Special Modes Setting - Sharp XV-Z2000 Operation Manual

Computer Image Adjustment ("Fine Sync" menu)

You can adjust the computer image, match the computer display mode, and confirm the
input signal using the "Fine Sync" menu.
Adjusting the Computer
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
Menu operation Page 38
Example: "Fine Sync" menu screen for
INPUT 5 (RGB) mode
Description of Adjustment Items
Selectable items
Clock Adjusts vertical noise.
Phase Adjusts horizontal noise (similar to
tracking on your VCR).
H-Pos Centres the on-screen image by moving
it to the left or right.
V-Pos Centres the on-screen image by moving
it up or down.
Note
• You can automatically adjust the computer im-
age by setting "Auto Sync" on the "Fine Sync"
menu to " " (ON) or pressing
mote control. See page 46.
• "Clock", "Phase", "H-Pos" and "V-Pos" cannot be
used in the DIGITAL mode.
• "Clock" and "Phase" cannot be used in the Com-
ponent mode.
• The adjustable area of each item may be
changed according to the input signal.
• To reset all adjustment items, select "Reset" and
press .
Description
on the re-

Special Modes Setting

Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in "Special Modes" on the "Fine
Sync" menu may need to be selected to match
the computer display mode.
Menu operation Page 40
Example: "Fine Sync" menu screen for
INPUT 5 (Component) mode
Note
• If your computer displays patterns which repeat
every other line (horizontal stripes), flickering
may occur which makes the image hard to see.
• When inputting DTV 1080
corresponding type of signal.
• See "Checking the Input Signal" on the next
page for information on the currently selected
input signal.
I signal, select the
-45