Table of Contents
Advertisement
EnglishVersion
12/6/05
WALL MOUNT INSTALLATION
NOTE:
Do not mount the TC100 directly to plasterboard, paneling, brick, or
concrete block. Rather, using appropriate fasteners, secure a board
to the wall and then mount the TC100 to the board.
1.
At a height convenient for all members of the work force and within 5 ft. of a power out-
let, use the mounting template (enclosed) to mark the points where the mounting screws
for the TimeMaster are to be installed.
2.
Leaving 1/4 in. of screw shank exposed, mount enclosed screws into place.
3.
Attach metal bracket to back center of clock (see photo).
4.
Hang the TimeMaster from the mounting screws and secure the bracket to the wall.
11:06 AM
Page 12
12
Hide quick links:
Advertisement
Table of Contents
