Program Mode Description - Royal TimeMaster TC100 Instruction Manual

EnglishVersion 12/6/05
To program the date, time, and other settings, you must access the control panel
behind the front cover (see instructions on page 5 for removing the front cover, if
needed).
The 3 buttons used for programming are:
Mode -
Select -
Setting -
At any time while in the program mode, if no buttons are pressed, the display auto-
matically returns to normal operational mode after 20 seconds.
11:06 AM Page 9
Used to enter and select the desired program mode.
Used to select / confirm the program setting shown in the display.
Used to access the desired setting.
9
PROGRAM MODE