Changing The Lcd Screen Display - Rollei XS-10 inTouch User Manual

Changing the LCD Screen Display

The type of information displayed on the LCD screen can be changed using the
Display button.
Press the Display button repeatedly to change the LCD display from one type to
another.
In Record Mode, the LCD display can be changed into any of the following:
OSD on
Guide lines on
Note
• The OSD information may vary depending on the record mode type.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
OSD on
LCD display cannot be changed in the following situations:
Note
• Manual exposure mode
• Recording movie or audio clips
• Playing movie or audio clips
• Playing slideshow
Chapter 3: Using the LCD Screen
307 307 307
27/27 27/27 27/27
Full OSD on
18
Full OSD on
OSD off
27/27 27/27 27/27
F 3.0 1/ 30 F 3.0 F 3.0 1/ 30 1/ 30
3200 3200 3200
0.0EV 0.0EV 0.0EV
307 307 307
0.0EV 0.0EV 0.0EV
3200 3200 3200
OSD off