Table of Contents
Advertisement
----------------------------------------------------------------------------------------------------------------------------------------------------------WINDOWS XP
2.6
Windows XP Setup
2.6.1
Install the Modem Driver
1. Close all applications.
2. Choose Start > Control Panel.
3. Double click on Phone and Modem Options.
4. Select the Modems tab and click Add...
5. Check "Don't detect my modem; I will select it from a list." Then, click Next >.
6. From the Manufacturer list, highlight Iridium
7. Click Iridium PPP Data Modem, and then click Next>.
8. Click the "Selected ports" button. Click on an available COM Port (e.g., COM1). This is the port to
which you will connect your Iridium phone. Click Next >.
9. Click Finish.
2.6.2
Configure Dial-Up Networking
1. Choose Start > All Programs > Accessories > Communications > Network Connections.
2. Click "Create a new connection".
3. Click Next>.
4. Select "Connect to the Internet" and click Next>.
5. Select "Set up my connection manually" and click Next>.
6. Select "Connect using a dial-up modem" and click Next>.
7. If a "Select a Device" window appears, check the box next to "Iridium PPP Data Modem", and
uncheck all other devices. Click Next>.
8. Enter a connection name (e.g., "Iridium Direct Internet 2.0") and click Next>.
9. In the Phone Number box, enter 008816000025 and click Next>.
10. If using XP Professional Edition, a window may appear to select either "Anyone's use" or "My use
only". Choose either selection and click Next>.
11. A username and password are not necessary. Click Next>.
12. Click Finish
13. Click Properties.
14. Click the Networking tab.
Iridium Satellite LLC
8
February 22, 2006
Advertisement
Table of Contents
