Using The Self-Timer - Ricoh Caplio R5 User Manual

t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1
Switch the mode selector to 5.
2
Press the t (Self-timer)
button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
will shoot after 10 seconds.
• Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10 sec, 2 sec, and Self-timer Off.
3
Press the shutter release button.
• The focus is locked, and the flash blinks when the self-timer
starts.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t (Self-timer) button and change the self-timer setting to
[SELF-TIMER OFF].
• When the self-timer is set to 2 seconds, the flash does not blink.
42