Advertisement
Note:Thetimeofdaymustfirstbesetinordertooperate theoven.
READ
TH E INSTRU CTIONS CAREFU LLY B EFORE USING TH E OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
BAKE TIME
PAD--
Used to
enter the length of
the baking time.
CLOCK PAD--
Used ._
_
to set the time of day.
•
o
TIMER ON/OFF
PAD--
Used to set or
cancel the minute
®
®
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous
Bake
feature.
/
START TIME PAD--
Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TiME to program a delayed
bake cycle.
UP and DOWN ARROW PADS--
Used along
with the function
pads to select oven
temperature,
cook time, start time (when
programming
an automatic start time), time
of day, clean time and minute timer.
FEATURE iNDiCATOR LIGHTS--
These light to show which feature
is in use.
BAKE PAD--Used
to select the bake
function.
BROIL PAD--
Used to
o
/select
the variable
broil
function.
• Oven
•
OVEN, PREHEAT & DOOR LOCKED LIGHTS*--
The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature.
The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature
is reset higher than the
actual oven temperature.
The "DOOR
LOCKED"
light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
SELF-CLEAN
PAD--
Used to select the Self-
Cleaning
cycle. A 2 or 3
hour Self-Clean time may
be selected.
CLEAR/OFF
PAD--
Used to clear
any function
previously
entered
except the time of day and minute
timer. Press CLEAR/OFF
to stop
cooking. Also the CLEAR/OFF
pad
is used to activate oven door lockout
setting.
*Note; The OVEN indicator light on the electroni c display
will turn ON & OFF when using the Bake feature & during
preheat. This is normal & indicates that the oven is cycling
to maintain the selected baking temperature. When the
preheat indicator, light turns OFF, your oven is ready
Temperature
conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C
to 287°C).
For a silent
control
panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold _.
After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @
again for 7 seconds until the control beeps
once.
To change the temperature
to °C (Celsius) or from °C to
°F (control
should
not be in a Bake or Clean mode):
1.
Press _.
"
"appears in the display.
2.
Press and hold the /_
until "HI" appears in the
display.
3.
Press and hold _,o_ until °F or °C appears in the
display.
4.
Press the f_
or V
to change °F to °C or °C to °F.
5.
Press any control pad to return to normal operating
mode.
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
NOTE: To turn the time of day display OFF or ON in the display press _',,,) and hold for 15 seconds (the control will beep
once) and then release. This feature aces not remove the set time of day from the memory ofth e contrc. When the display
is turned OFF the time of day will re-appear for a few seconds any time the _)
pad is touched.
10
Advertisement
