LG M5201C User Manual page 6

_]_ (_) Turn on power by pressing the power button on the product.
(_Turn on the PC.
T
Power button
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT'--_'='--_SET _
Or, press the SOURCE button on the bottom of the product.
_SOURCE---_ _'j,---,- AUTO/SET
(_ When connecting a signal input
with D-Sub cable.
• Select RGB : 15-pin D-Sub analog signal.
(_When with HDMI to DVl cable.
connecting
a
signal input
• Select HDMI/DVl : HDMI to DVl Digital signal.
• How to connect to two computers.
_. Note I Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT bu_on on the iemote Controlto Select the €omputer tOuse.
Directly connect to a grounded power outlet on the wall or a power bar with a ground
@