Front Panel; Side Control Panel - Vizio M190VA User Manual

VlZIOVASERIES UserManual
Chapter 2 Basic Controls and Connections
Front Pane
Remote Control Sensor--Point the remote
control directly at this window on the lower right
corner of your HDTV for the best response to
the remote signal.
Side Contro Pane
1. LIGHT SENSOR--Activate it through the OSD menu if
you would like the TV to automatically adjust to the ambient
lighting of the room. This location applies only to the 19"
models, the 22" and 26" models have the sensor placed on
the power light indicator area.
2. POWER ( _ )--Turn your HDTV on by pressing the
button once. Press the button again to turn your HDTV off.
3. MENU--Press to launch the on-screen menu. If a sub-
menu is active, this button will proceed to the next level.
4. CH A/TmPress to change the channels up or down.
While the menu is active, these buttons function as up and
down controls.
5. VOL A/r--Press to increase or decrease the speaker
volume. While the menu is active, these buttons function as
left and right controls.
6. INPUT (SELECT)--Press to cycle through the various
devices connected to your TV (called Inputs). The inputs
cycle in the following sequence: DTV/TV, AV (Composite),
COMPONENT, HDMI 1, HDMI 2, RGB (VGA) and PHOTO.
Once you have stepped through the entire sequence, you
will return to the beginning. If a sub-menu is active, pressing
this button will return to the previous menu level.
Additionally, when the menu is active, this button confirms the menu function to be adjusted.
10
www.VlZlO.com