Installing The Batteries; External Input Mode - Zenith TVSC0902 Operating Manual & Warranty

1) Open the battery compartment cover by
pressing the cover on the remote unit in the
direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
When using an external input signal (another
VCR or video camera), connect the player's
audio/video output cables to
the AUDIO IN/VIDEO IN
jacks of your TVNCR. Then
press the CHANNEL UP or
DOWN button until "AUX"
appears on the screen.
AUX
- 13 - EN
9K16