Reset Lun Paths To Factory Settings; Refresh The View; View Volume Group Information In Table View - HP StorageWorks 8000 - NAS Installation And User Manual

NAS Data Path Manager
To repair a volume group:
1. From the Storage tab, select Volume Groups.
2. Select the tree view.
3. Select the volume group to repair.
4. Select Actions.
5. Check the warning box and click OK.
As part of the repair process, CIFS and NFS connections may be disrupted. For a
dedicated system, the volume groups are then activated. For an HA system, the
package is stopped and then started again.

Reset LUN Paths to Factory Settings

1. From the Storage tab, select Volume Groups.
2. Select the volume group to reset.
3. Select Actions > Reset LUN Paths to Factory Settings. This will bring up
4. Read the warning, and accept it by checking the box next to the warning, and

Refresh the View

To refresh the view, select Actions > Refresh.

View Volume Group Information in Table View

From the Storage tab, select Volume Groups, then the View Volume Groups icon
(first icon to the right of Actions) to use the table view.
The table view shows the following information for each volume group:
26
— In a dedicated attach configuration, select Repair Volume Group.
— In an HA configuration, select Restart Failover Package for Selected
Volume Group
the Reset selected LUN Paths to factory settings dialog box.
clicking OK.
Volume group name
Total capacity (GB)
Space allocated to file volume(s) and snapshot(s) (GB)
Space available for file volume(s) snapshot(s) (GB)
hp StorageWorks NAS Data Path Manager Installation and User's Guide