Tampering with Emission Control System Prohibited
Federal law and California State law prohibit the
following acts or the causing thereof: (1) the removal or
rendering inoperative by any person other than for
purposes of maintenance, repair, or replacement, of
any device or element of design incorporated into any
new engine for the purposes of emission control prior to
its sale or delivery to the ultimate purchaser or while it is
in use, or (2) the use of the engine after such device or
element of design has been removed or rendered
inoperative by any person.
Among those acts presumed to constitute tampering
are the acts listed below:
Do not tamper with the original emission related parts:
•
Carburetor and internal parts
•
Spark Plug
•
Magneto or electronic ignition system
•
Fuel filter element
•
Air cleaner elements
•
Crankcase
•
Cylinder head
•
Breather chamber and internal parts
•
Intake pipe and tube
GENERAL INFORMATION
Location of Safety Related Labels
Figure 1
a. Warning (Refer to )
b. Engine Maintenance (Refer to Figure 3)
Figure 2
Engine Serial Numbe
The engine serial number is your only means of
identifying your particular engine from others of the
same model type.This engine serial number is needed
by your dealer when ordering parts. Refer to figure 4.
C
A. Fuel Tank Cap
B. Fuel Tank (capacity 2.0L [.0528US gal.])
C. Fuel Tube
D. Carburetor
E. Priming Pump
F. Air Cleaner
G. Recoil starter
H. Recoil Starter Grip
I. Oil Drain Plugs (engine oil capacity 0.65L [0.69US
gal.])
27
Figure 3
Figure 4
Figure 5