Zanussi ZCG661 User Manual page 17

Problem
The appliance does not operate.
The grill, burners, ovens do not work. There is no electrical supply.
The grill, burners, ovens do not work. There is no electrical supply.
The grill, burners, ovens do not work. There is no gas supply.
There is no spark when lighting the
gas.
The flame is blow out immediately af-
ter ignition.
The gas ring burns unevenly.
The oven does not heat up.
The oven does not heat up.
The oven does not cook evenly.
The oven lamp does not operate.
Steam and condensation settle on the
food and in the oven cavity.
The appliance makes noises or pop-
ping sounds.
Possible cause
The appliance is too hot.
Burner cap and crown are placed un-
even.
Thermocouple is not heated suffi-
cient.
The burner crown is blocked with
food residue.
The oven is not switched on.
The necessary settings are not set.
The oven lamp is defective.
You left the dish in the oven for too
long.
Remedy
Cool down the appliance for some
hours.
Make sure that the unit is connected
and the electrical supply is switched
on.
Examine the house electrical installa-
tion fuse.
Examine the house gas supply, use
other gas appliance (Central heating
or gas fires).
Make sure that the burner cap and
crown are in correct positions.
After lightning the flame, keep the
knob pushed for approximately 5
seconds.
Make sure that the injector is not
blocked and the burner crown is clear
of food particles or cleaning fluids.
Dry them with a cloth and clean stub-
born marks away with a dry nylon
brush (for example an old tooth-
brush).
Switch on the oven.
Control the settings.
Check that the appliance is correctly
installed and levelled, and that you
use the recommended temperatures
and shelf positions.
Replace the oven lamp.
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends.
When the gas is drawn through the
burner, it can compress as they heat
up. Some metal parts of the appli-
ance expand and contract when they
heat up or cool down. The noises are
normal.
17