This Guide; 1-1.Purpose; 1-2.Intended Audience; Organization And Chapter Layouts Of This Guide - TECSys Development ConsoleWorks Version 1.5.0 Installation Manual

For windows nt/2000
Table of Contents

Advertisement

1. This Guide

1-1. Purpose
This guide describes how to install and configure ConsoleWorks on a host using Windows NT version 4.0 with
Service Pack 3 or later or Windows 2000 operating system.
1-2. Intended Audience
This guide is written for system administrators and managers installing and configuring the ConsoleWorks appli-
cation on a Windows NT or Windows 2000 host.

1-3. Organization and Chapter Layouts of This Guide

This section describes the purpose of the guide, intended audience, organization and features of this
guide, reader feedback, customer support, and conventions used in this guide.
1-4. Introduction, Overview and Concepts
This section introduces the ConsoleWorks application. It also describes an overview of the installation
process, terms and concepts used during the installation, some of the concepts used in configuration and
has a special note for Polycenter Console Manager (PCM) users.

1-5. Pre-Installation

This section helps the installer prepare to install ConsoleWorks by listing the hardware and software needed
to install and run ConsoleWorks and by suggesting some installation design hints and techniques.

1-6. Installation

This section contains the first stage of the installation procedure for installing ConsoleWorks onto a host ma-
chine. Once the default installation file set is installed, optional functions, such as:
importing supplied event definitions, and/or
adding ConsoleWorks to the system startup,
are added based on the desired ConsoleWorks functionality.
The second stage of the installation procedure for installing ConsoleWorks onto a host machine is called
Configuration and is covered in the document: ConsoleWorks Administrator and User Guide.

1-7. Appendices

The appendices include a additional information that may be useful during installation.

1-8. Reader Feedback

TDi welcomes comments to this guide and other products. Readers are encouraged to send feedback to TDi
at:
TECSys Development Inc (TDi)
1600 10th Street
Suite B
Plano, TX 75074 USA
attn: ConsoleWorks Customer Feedback
Phone: 972.881.1553
FAX:
972.424.9181
Email: support@tditx.com
WEB:
http://www.tditx.com/
1

Advertisement

Table of Contents
loading

Table of Contents