Software Update; Stop The Consoleworks Server And License Manager; Remove The Consoleworks Client And Server Programs; Re-Install The Consoleworks Server And Client Programs - TECSys Development ConsoleWorks Version 1.5.0 Installation Manual

For windows nt/2000

Table of Contents

5. Software Update

This section provides information regarding an Update of the ConsoleWorks software.

Note: If ConsoleWorks is being installed as an update to Version 1.4-0, a new directory structure will be created. Save exist-

ing template files, action routines, etc. prior to the installation and move them to the proper directory upon completion of

the install.

Access the Services Control Panel to stop the currently running ConsoleWorks services. The Services Control

Panel is accessed through the Start Menu: Settings: Services. The following services must be stopped:

1) Stop the ConsoleWorks Server

2) Stop the ConsoleWorks LMF Server

Access the Add/Remove Programs Panel to remove the ConsoleWorks Client and Server from the system. The

Add/Remove Programs Panel is accessed through the Start Menu: Settings: Add/Remove Programs. The fol-

lowing programs are to be removed:

1) Remove the ConsoleWorks Client (if necessary)

2) Remove the ConsoleWorks Server

Find the section of the web page containing the Windows NT/2000 installation kits.

installation executable for the ConsoleWorks Server for the Windows platform is Setup.exe. Run the setup pro-

gram and respond to the questions appropriately (refer to Section 4-4 for applicable screens).

If appropriate, find the section of the web page containing the Windows NT/2000 installation kits. The name of

the installation executable for the ConsoleWorks Client for the Windows platform is Setup.exe. Run the setup

program and respond to the questions appropriately.

Before starting the ConsoleWorks server you should move the licenses you received from TDI to:

C:\Program Files\TECSys Development, Inc\ConsoleWorks Server\LMF\TDI_Licenses

· note: license files are text files that must be named as filename.LIC (where filename is a descriptive

name of your choosing, but should indicate the actual product license being loaded)

To start the ConsoleWorks server access the Services Control Panel and start each executable,

1) ConsoleWorks LMF Server

• note: if you would like to make certain all of your licenses loaded properly, you may check the

contents of the following file:

C:\Program Files\TECSys Development, Inc\ConsoleWorks Server\Log\ConsoleWorksLMFService_Err.Log

The name of the

Table of Contents