Altinex MULTI-TASKER MT109-102 User Manual page 24

3: SET RAMP TIME
CURRENT RAMP TIME: 18 SEC
1: 04 SEC
2: 06 SEC
3: 08 SEC
4: 10 SEC
5: 12 SEC
6: 14 SEC
7: 16 SEC
8: 18 SEC
ESC: GO BACK
KEY=
ESC: GO BACK
KEY=
3: STATUS
Equivalent to the [C] command.
Returns the card status.
4: HELP
Equivalent to the [HELP] command.
Displays a list of commands available for the
MT109-102 along with a brief description.
ESC
Returns to the parent menu.
7.4.5 MENU MODE EXAMPLES
All MENU MODE
MT109-102 is installed in slot #1. Start by
clicking the mouse in the Terminal window.
Press ENTER and a list of available cards will
be displayed.
NOTE When entering numeric values (not
selecting menu items) the system may
echo each character as it is typed. For
example, entering a volume of 03 may
appear as
depending on the settings of the control
software.
400-0343-003
examples assume
0033 on the screen,
1. Select THIS CARD for control
Follow the keystrokes below to select Input 3 as
the source input.
Enter
01
1
1
0
ESC
ESC
2. Set Input 3 Volume
Starting from the Main Menu, set Input 3
volume level to 16. Follow the keystrokes
below.
2
2
3
16
ESC
ESC
3. Set Output Volume
Starting from the Main Menu, set the output
volume level to 16. Follow the keystrokes
an
below.
1
4
1
111...
ESC
ESC
ESC
23
23
MULTI-TASKER™
List available cards
Select MT109-102 in slot #1
Select CONTROL Menu
Select Card/Group Select
Select This Card (card #1)
Return to CONTROL Menu
Return to the MAIN Menu
Select SETUP Menu
Select Set Input Volume
Select Input 3 Volume
Enter 16
NOTE The system may echo the 1
and the 6 entries, depending
on the settings.
Return to SETUP
Return to the MAIN Menu
Select CONTROL Menu
Select VOLUME
Select OUTPUT volume
Press '1' to increase volume level until
16 is reached.
Return to VOLUME Menu
Return to CONTROL menu
Return to the MAIN Menu