Please read this manual carefully before using your MT113-102/103. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT113-102/103 and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
ABOUT YOUR MT113-102/103 MT113-102/103 - 3 in Mixer, 1 fixed line level output and 10W amplifier Card The MT113-102/101 is a Stereo Audio Power Amplifier Card designed MultiTasker™. When installed Enclosure (MT100-100), This connection of up to three line level balanced/ unbalanced microphone inputs.
INSTALLING YOUR MT113-102/103 Step 1. Slide the MT113-102/103 into an available slot in the Multi-Tasker™ Basic Enclosure in order to connect to the bus. Make sure that the MT113-102/103 card fits into place. Secure the card to the Multi- Tasker™...
1. [VERCnUi] This command receives the software version and card type for the MT113-102/103 card. Cn = card ID number (n = # from 1 to 19) Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation)
Page 10
Send commands [SEL2C5] [+] [+] [+] [+] [+]. After executing that command, send [C5] to get the new status of card 5: VOLIN1:16 VOLIN2:21 VOLIN3:32 VOLOUT:12 BASS:8 TREBLE:14 LOUDNESS:ON [SELmGkUi] This command sets path to adjust the individual volume level for a group of cards. Command Format: [SELmGkUi] [–] [–] [–] [–] or [+] [+] [+] m = Input number (m = 1 to 3) k = group number (k = # from 1-9)
Page 11
y = Absolute audio level (y = 1 to 15) k = group number (k = # from 1-9) i = Unit ID number (i = 0 to 9) Example: If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [VOL2A32G5U1] command to set maximum volume for card 1, 2, and 3 simultaneously.
Page 12
If card 1, 2, and 3 are grouped as group 5 of unit 1, send the [SELB1G5U1] [–] [–] [–] command to decrease the volume for card 1, 2, and 3 simultaneously. 9. [VBLyCnUi] This command sets absolute bass level for single card.
Page 13
n = Card ID number (n = slot # from 1 to 19) i = Unit ID number (i = 0 to 9) Example: If the status of audio card 2 of unit zero is as follows: VOLIN1:2 VOLIN2:12 VOLIN3:18 VOLOUT:8 BASS:8 TREBLE:14...
Page 14
To clear all groups of unit 1, send the [CLR GU1] command. 17. [GkUi] This command is used to request group data. With the command, the user can identify which input or output of a particular group is on. Command Format: [GkUi] k = group number (k = # from 1-9) i = unit number (i = # from 0-9) Example:...
If there is still no sound, see Solution 2 amplifier to a reasonable level. If there is still no sound, call ALTINEX at (714) 990-2300. The source level is above 1Vp-p. below 1V p-p. If the sound is still distorted, see Solution 2.
ALTINEX POLICY 9.0 LIMITED WARRANTY / RETURN POLICY Please see the Altinex website at for details on warranty and return policy. 9.1 CONTACT INFORMATION ALTINEX, INC. 592 Apollo Street Brea, CA 92821 USA TEL: 714-990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.altinex.com solutions@altinex.com...