Craftsman BRUSHWACKER 358.798461 Operator's Manual page 5

open flamesfromwater heaters,elec-
tric motorsor switches,fumaces,etc.
• Store unit so the blade or line limiter
cannot accidentally cause injury. The
unit can be hung by the tube.
• Store unit out of reach of children.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model: 358.798461
• Brushwacker
* 2 handle bar screws
• 4 Blade shield screws
• 1 Cupped washer
• 1 large nut for installing blade
• 1 long hex key (wrench)
• 1 short hex key (wrench)
• 1 upper handlebar_over bracket
• 1 Shield for use with blades
• 1 Shield for use with trimmer head
• 1 semi-automatic trimmer head
• 1 shoulder strap with warning
• 1 weed blade
• 1 handlebar
• 1 container of oil
ACTUAL SIZE HARDWARE
Handlebar
Screw Blade
Shield
Screw
Large nut for
installing
Blade
Cupped Washer
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance or find
parts missing or damaged, call
1-800-235-5878.
It is normal for the fuel filter to rattle in
the empty fuel tank.
Finding fuel or oil residue on muffler is
normal due to carburetor adjustments
and testing done by the manufacturer.
ASSEMBLY
WARNING: If received assembled,
repeat all steps to ensure your unit is
properly assembled and all fasteners
are secure.
TOOLS REQUIRED
In addition to the 2 hex key wrenches
provided with your unit, you will need
an adjustable wrench, or large pliers,
and a Phillips screwdriver.
ATTACHING THE HANDLEBAR
WARNING:
The handlebar must be
installed as shown to provide a barrier
between operator and spinning blade.
• Align the handlebar with the straight
barrier portion to the left and the
curved portion to the right as shown.
• Position the short, straight section of
the handlebar in the mounting block.
• Place cover on top of the handlebar.
Attach cover to the mounting block
with 2 screws; finger tighten only.
• Pivot the handlebar forward or back-
ward to a comfortable position.
• Be sure the handlebar is installed
correctly; then, tighten each screw
securely with the large hex wrench.
Curved Grip Screws
Portion _. //.d_
1_ _'_' "_--------"_S Ci_:t r
._,'_-'_._ Str "g
F _on
Mounting
ATTACHING SHOULDER STRAP
WARNING: Proper shoulder strap and
handlebar adjustments before starting
the engine are required.
• Try on shoulder strap and adjust for fit
and balance before starting the engine
or beginning a cutting operation.
5