Advertisement
Emptying
the Drum
I
ARNING: To avoid injury from
accidental starting, unplug power
cord before emptying the drum.
1. To remove power assembly to empty
contents of drum, simply pull the flexi-
ble latches outward on each side of the
power assembly to release from the
drum.
2. While holding the latches out, lift the
power assembly up and away from the
drum.
3. Lay power assembly upside down on a
clean area while emptying drum or
changing filter.
4. Dump the drum contents into the proper
waste disposal container. Dump drum
contents opposite the vacuum inlet to
avoid spillage.
WARNING:
To avoid back injury or
falls, do not lift a vac heavy with liq-
uid or debris. Scoop or drain
enough contents out to make the
vac light enough to lift comfortably.
Cord Wrap
When vacuuming is complete, unplug the
cord and wrap it around the handle.
Moving
the Vac
1. Should it become necessary to pick the
vac up to move it, DO NOT pick the vac
up by the lid handles unless dust drum
is empty. To avoid dropping the vac due
to latches releasing or possible part
breakage, pick the vac up by the lip of
the dust drum.
Advertisement
