Download Print this page

Sears Craftsman 113.177805 Owner's Manual page 5

8 gallon wet/dry vac

Advertisement

Float/Cage Assembly
WARNING: For your own safety,
never connect plug to power source
outlet until all assembly steps are
complete and you have read and
understood the safety and operation
instructions.
Do not operate vac
with any parts damaged or missing.
• Place the power assembly of vac
upside down into the drum or on a
clean smooth surface.
2. Locate the float• Place the float over the
opening in the center of the lid with the
words "This Side Towards Lid" laying
face down over the hole.
WARNING: To avoid personal injury
or damage to vac be sure to keep
hands, fingers, or any other foreign
objects out of the center opening
when assembling the float.
3. Line up filter cage tabs with the slots in
the center ring of the lid assembly•
4. Push on the filter cage until the tabs
snap into the slots for a secure fit.
NOTE: If fitter cage needs to be removed,
because the float is placed in the wrong
way, use a slotted screwdriver and insert
the blade near one of the tabs between
Filter Assembly
1. Carefully slide the filter over the filter
cage, sliding it over the center ring cov-
ering the 3 slots until the filter stops
against the lid.
2. Place the hole in the filter plate over
threaded screw of the filter cage.
3. Gently push on the filter plate to seat
the rubber ring of the filter inside the cir-
cular channel of the filter plate.
4. Place filter nut onto threaded screw and
tighten it down. Finger tighten only.
NOTE: Lever of filter nut should be away
from plate as shown.
IMPORTANT:
Do not overtighten
as this
may deform or crack the filter plate or filter
cage.
the filter cage and the center ring of the
lid. Pry the tab out of the slot• Tilt the cage
and lift away from the lid. To replace, fol-
low float/cage assembly instructions•
F,ter
_,_
Cage
°eWe
Float__
ly
Solid End -_"
!
Cage
(3)
Slots (3)
NOTE: Your filter has a red stripe that
matches an in-store displayer. When you
visit your local Sears store, just remember
the color of your stripe for the correct size
filter•
Filter
Nut-._
Filter
Filter_.
_
j
Cage
Plate _
_
I"
Red 7'
Stripe
Filter F"

Advertisement

loading