Table of Contents
Advertisement
ASSEMBLY
ENGINE
PREPARATION
Fill Crankcase
With
Oil
The tdmmer was shipped with a container of
SAE30 motor oil This oil must be added to the
engine before operating
1
Remove the oil fill cap/dipstick
shown in
Figure 4 Fill the crankcase
to the FULL
line on oil fill cap/dipstick
DO NOT OVER-
FILL.
2
install the oil fill cap/dipstick
and tighten
securely
Fill Fuel Tank With Gasoline
For the
correct
procedure
and
grade
of
gasoline, see "How To Fill With Gasoline"
in
the Operation section
Fuel Cap
Oil Fill Cap/
Figure 4
,I CHECKLIST
For the best performance
and
satisfaction
from this quality product, please review the fol-
lowing checklist before you operate the trim-
met:
_-"
All assembly
instructions
have been
completed
l-"
Check carton
Make sure no loose parts
remain in the carton
As you learn how to use the trimmer, pay extra
attention to the following important items:
v",_"
Engine oil is at correct level
v,'_t
Fuel tank is filled with fresh, clean, reg-
ular unleaded gasoline
_--"_"
Become
familiar
and
understand
the
function of all controls
Before your start
the engine, operate all controls
712490
8
Hide quick links:
Advertisement
Table of Contents
