How To Use Trimmer Head Drive Lever; How To Use The Throttle Control; How To Use The Primer Button - Craftsman 536.773510 Operating Instructions Manual

OPERATION
HOW TO USE THE
TRIMMER HEAD DRIVE LEVER
To engage the trimmer head, hold the con°
trol bail against the handle Move the
trimmer head drive lever forward to en-
gage the trimmer head See Figure 6 The
faster the engine runs, the faster the trim-
mer head will rotate
Once the trimmer head is rotating, push
the trimmer forward to trim
Control Bail
_Handle
Trimmer Head
Drive Lever
Figure 6
HOW TO USE THE
THROTTLE CONTROL
2
During normal use, set the throttle con-
trol lever in the FAST position to run the
engine at full speed
Pull the throttle control lever back to de-
crease engine speed Push the throttle
control lever forward to increase engine
speed
To stop the engine, pull the throttle con-
trol lever completely back to the STOP
position
Throttle Control
Lever
Figure 7
HOW TO USE
THE PRIMER BUTTON
! Push the primer button five times See
Figure 8 for location Wait approximately
two seconds between each push
NOTE: Do not use the primer button to re-
start a warm engine after a short shutdown.
712490 tO