Craftsman 917.273753 Owner's Manual page 20

18.0 hp, 42" mower electric start 6 speed transaxle
Table of Contents

Advertisement

ENGmNE OiL FmLTER
Replacethe engineoil filter every season
or everyother oil change if the tractor is
used morethan 100 hours in one year.
AmRFILTER
Yourenginewill not run properlyusing a
dirty air filter. Replacepre-cleanerafter
every 25 hoursof operationor every
season. Service paper cartridge every
100 hoursof operationor every season,
whicheveroccurs first.
Service air cleaner moreoften under dusty
conditions.
1. Pull up on air filter cover handleand
rotate towardsengine.
2. Removecover.
3. Carefullyremoveair filter cartridge and
pre-cleanerfrom base.
4. Clean basecarefully to preventdebris
from falling into carburetor.
NOTE:If very dirty or damaged,replace
cartridge.
5. Place newpre-cleanerand cartridge
firmly in base.
6. Align tabs on coverwith slots in blower
housingand replacecover.
7. Hook handleon coverand pushdown
on handleto close.
iMPORTANT: Petroleumsolvents,such
as kerosene,are not to be usedto clean
the cartridge. They may causedeterio-
rationof the cartridge. Do not oil car-
tridge. Do not use pressurizedair to clean
cartridge.
CLEAN AmR SCREEN
Air screen mustbe kept free of dirt and
chaffto preventenginedamagefrom
overheating. Cleanwith a wire brushor
compressedair to removedirt and stub-
born dried gum fibers.
ENGmNE COOLINGSYSTEM
Debris mayclog the engine'sair cool-
ing system.Removeblower housingand
clean area shown to preventoverheating
and enginedamage.
Air Screen
Clean out chaff and debris
MUFFLER
Inspect and replace corroded muffler and
spark arrester (if equipped) as it could cre-
ate a fire hazard and/or damage,
SPARK PLUG(S)
Replace spark plug(s) at the beginning
of each mowing season or after every
100 hours of operation, whichever occurs
first. Spark plug type and gap setting are
shown in "PRODUCT SPECIFICATIONS"
section of this manual,
Cartridge
iN-LiNE
FUEL
FILTER
The fuel filter should
be replaced
once
each season.
If fuel filter becomes
clogged,
obstructing
fuel flow to carbu-
retor, replacement
is required.
1. With engine
cool, remove
filter and
plug fuel line sections.
2.
Place
new fuel filter in position
in fuel
line with arrow
pointing
towards
carbu-
retor.
3.
Be sure there
are no fuel line leaks
and clamps
are properly
positioned.
4.
Immediately
wipe
up any spilled
gaso-
line.
Tabs
-Slots
_
Clamp
Clamp J
k._./_/
:Z_
-"- Fuel Filter
2O

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents