Cutting Height - Craftsman 3One 917.382840 Owner's Manual

Jii Ill _ I I / II Illll II Ill, I Illlll Illl, I I Illl'lll"rl . ...... :'": " : H,I| I I II I Illlt Illll ....
RVICE AND ADJUSTMENTS
................... tttttt i itllt iiitll H H_HH,,,, tt t tl tl tltl =/IJ tttttU II
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS;
o Release control bar.
° Make sure the blade and all moving parts have completely stopped,
° Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug,
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See "TO ADJUST CUTTING HEIGHT" in the Operation
section of this manual.
REAR DEFLECTOR
The rear' deflector, attached between the rear wheels of
your lawn mower, is provided to minimize the possibility
that objects will be thrown out the rear of the lawn mower
into the operator's mowing position° If the rear deflector
becomes damaged, it should be replaced.
TO ADJUST HANDLE (See Fig, 12)
The handle on your lawn mower has three (3) height
positions - adjust to height that suits you.
° Remove knob and carriage bolton one side of the lower
handle.
• While holding handle assembly, remove knob and
carriage bolt from opposite side, align hole in handle
with desired hole in handle bracket and reassemble
bolt and knob and tighten secureIy_
• Align opposite side of handle with same positioning
hole and secure with boit and knob,
KNOB
FIG. 12
ENGINE
CARBURETOR
Your carburetor has a non-adjustable fixed main jet for
mixture control. If your engine does not operate property
due to suspected carburetor problems, take your lawn
mower to an authorized service center for repair and/or
adjustment°
ENGINE SPEED
Your engine speed has been factory set. Do not attempt to
increase engine speed or it may resultin personal injury, tf
you believe that your engine is running too fast ortoo slow,
take your lawn mower to an authorized service center for
repair and/or adjustment.
14