Securing The Power Cable(S); Turning On The System - Dell PowerEdge R320 Getting Started Manual
Document
Hide thumbs
Also See for PowerEdge R320:
- Owner's manual (143 pages) ,
- Planning, installation and service manual (67 pages) ,
- Technical manual (51 pages)
Table of Contents
Advertisement
Connect the system's power cable to the system and, if a monitor is used, connect the
monitor's power cable to the monitor.
Securing The Power Cable(s)
Figure 4. Securing the Power Cable(s)
Bend the system power cable(s), as shown in the illustration, and attach to the cable
strap.
Plug the other end of the power cable(s) into a grounded electrical outlet or a separate
power source such as an uninterruptible power supply (UPS) or a power distribution unit
(PDU).
Turning On The System
Figure 5. Turning on the System
5
Advertisement
Table of Contents
