Gigabyte GA-MA78LMT-S2 User Manual page 74

B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Un-
der Integrated Peripherals, make sure OnChip SATA Controller is enabled. To enable RAID, set OnChip
SATA Type to RAID.
OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
Legacy USB storage detect
Onboard Serial Port 1
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
hi : Move Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your moth-
erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you
have and the BIOS version.
Appendix
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[Enabled]
[RAID]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[3F8/IRQ4]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
F10: Save
Figure 1
- 74 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults