2-6
Integrated Peripherals
OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
Onboard LAN Function
Onboard LAN Boot ROM
SMART LAN
Onboard Audio Function
Legacy USB storage detect
Onboard Serial Port 1
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
hi : Move
Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type
Configures the operating mode of the integrated SATA controller.
Native IDE
RAID
AHCI
Onboard LAN Function
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
Enables RAID for the SATA controller.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
[Enabled]
[Enabled]
[Native IDE]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[3F8/IRQ4]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
F10: Save
- 47 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup