Advanced Bios Features - Gigabyte GA-MA785GT-UD3H User Manual

Am3 socket motherboard for amd phenom ii processor/amd athlon ii processor
Table of Contents

Advertisement

2-5

Advanced BIOS Features

Internal Graphics Mode
UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
AMD C1E Support
Virtualization
AMD K8 Cool&Quiet control
 Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Full Screen LOGO Show
Backup BIOS Image to HDD
Init Display First
higf : Move
Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled
UMA
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if an ATI graphics card
is installed. (Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
Auto
D-SUB/DVI
D-SUB/HDMI
AMD C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU
core frequency and voltage will be reduced during system halt state to decrease power consumption.
(Default: Disabled)
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the onboard graphics controller.
Allocates memory for the onboard graphics controller from the system memory.
(Default)
Lets the BIOS automatically determines the primary display port for output,
depending on to which port the display device is connected, D-SUB/DVI-D or
D-SUB/HDMI. (Default)
Sets the D-SUB/DVI-D as the graphics display.
Sets the D-SUB/HDMI as the graphics display.
[UMA]
[Auto]
Disabled
[Auto]
[Disabled]
[Disabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[PCI Slot]
F10: Save
- 47 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents