Gigabyte GA-MA785GM-UD2H User Manual page 43

Precharge Time
Options are: Auto (default), 2T, 3T.
Row Cycle Time
Options are: Auto (default), 11T~26T.
RAS to RAS Delay
Options are: Auto (default), 2T~5T.
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable. (Default:
Manual)
DDR2 Voltage Control
Allows you to set memory voltage.
Normal
+0.1V ~ +0.3V Increases memory voltage by 0.1V to 0.3V at 0.1V increment.
Note: Increasing memory voltage may result in damage to the memory.
NorthBridge Volt Control
Allows you to set the North Bridge voltage.
Normal
+0.1V ~ +0.3V Increases North Bridge voltage by 0.1V to 0.3V at 0.1V increment.
SouthBridge Volt Control
Allows you to set the South Bridge voltage.
Normal
+0.1V ~ +0.3V Increases South Bridge voltage by 0.1V to 0.3V at 0.1V increment.
SidePort Mem Volt Control
Allows you to set the SidePort memory voltage.
Normal
+0.1V ~ +0.3V Increases SidePort memory voltage by 0.1V to 0.3V at 0.1V increment.
CPU NB VID Control
Allows you to set the CPU Northbridge VID voltage. Auto sets the CPU Northbridge VID voltage as re-
quired. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is de-
pendent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU
(Note) This item appears only if you install a CPU that supports this feature.
Supplies the memory voltage as required. (Default)
Supplies the North Bridge voltage as required. (Default)
Supplies the South Bridge voltage as required. (Default)
Supplies the SidePort memory voltage as required. (Default)
(Note)
- 43 - BIOS Setup