2.
Verify that the length and width guides are set correctly
Note
The default setting is for 8.5 x 11 in. paper. You must change the guides for A4 paper.
A4
3.
Push the tray completely into the printer.
4.
Specify the size of the paper by doing the following:
a.
In the front panel menus, select Printer Setup, then press the OK button.
b.
Select Paper Handling Setup, then press the OK button.
c.
Select Tray 6 Setup, then press the OK button.
d.
Select Auto Sensed or a listed paper size, then press the OK button.
8.5"
Phaser® 5500 Laser Printer
4-31
5500-240
5500-115
Paper Jams