Using Aux To Control A Second - X10 Wireless MouseRemote UR86A Owner's Manual

S TV, VCR,
ETTING UP FOR
C , CD, S
ABLE AND ATELLITE
R
ECEIVER
1. Turn on the device
you want to control
(TV, VCR, cable
box, etc.).
2. Press and hold
SETUP until the
LED indicator lights
steadily. Release the
SETUP button.
3. Press and release
the mode button*
that matches the
device you want to
control. The LED
blinks once. Use
AUX for CDs.
4. Enter the 3 digit
Code from the
Library Code Tables.
The LED turns off
after the last digit
entered.
5. Point the remote at
the device and press
the POWER button.
Your device should
turn off.
6. Turn your device on
and press CH +. If
the device responds,
setup is complete.
* You can store any code (TV, VCR, CBL,
SAT, CD etc.) under any mode except TV.
16
U AUX
SING TO CONTROL A
S TV, VCR, C
ECOND ABLE
S R
OR ATELLITE ECEIVER
The AUX button is normally used to
control an audio component such as a CD
player, but it can also be configured to
control a second TV, VCR, cable box or
satellite receiver.
1. Turn on the device
you want to control.
2. Press and hold
SETUP until the
LED indicator lights
steadily. Release
Setup button.
3. Press the AUX
button.
4. Enter the 3 digit
Code from the
Library Code Tables.
The LED turns off
after the last digit
entered.
5. Point the remote at
your A/V component
and press the
POWER button.
Your A/V
component should
turn off.
6. Turn your A/V
component on and
press CH +. If it
responds, setup is
complete.
17
B
OX