Advertisement
Connect cable service to the LCD Ill/Monitor.
Locate the Antenna/CaNe
jack on the
back of the TV.
Connect the cable wire to the
Antenna/CaNe
jack according to one
of the diagrams to the right.
After at[ connections are comptete,
ptug in the TV. The LCD W/Monitor
is
designed to operate on AC power.
CaNe TV
Wait Jack
Wire (75 ohm)
For cane box operation, leave the television
tuned to channel three or four and use the
cane box to change channels.
CaNe TV
Wail Jack
Coaxial Wire RF
(75 ohm)
75 OHM RF CABLE
300 TO75 OHM
ADAPTER
The wire that comes from an off-air
antenna
or cabte service provider.
Each end rooks [ike a hex shaped nut with
a wire sticking
through
the midd[e, and it screws onto the threaded jack on the back of the TV.
A sma[[ device that connects a two-wire
300 ohm antenna
to a 75 ohm RF jack. They are usually about an inch long with
two screws
on one end and a round opening
with
a wire sticking
out on the other end.
PAGE
lo
Advertisement
