Advertisement
Quick Links
Model D4041
Miter Saw Stand
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
Introduction
The Model D4041 Miter Saw Work Stand (Figure 1)
features a universal, adjustable T-track mounting system
for securing miter saws without modification. Laterally
and vertically adjustable ball bearing rollers on each
end of the stand support long workpieces. Roller mounts
rotate incrementally for fine height adjustment. Folding
legs and rubber wheels make this work stand portable.
Unpacking
This item was carefully packaged for safe transportation.
If you notice that it was damaged during shipping, please
contact your Shop Fox dealer immediately.
TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHEN USING THIS ITEM:
1. MITER SAW SAFETY. Follow all safety instruc-
tions in the miter saw manual.
2. MITER SAW WORK STAND SET UP. Make sure
the leg locking pins are fully snapped into
place before mounting the miter saw.
3. MITER SAW WORK STAND PLACEMENT. Only
operate the miter saw work stand on a hard,
flat, and level surface. DO NOT set up the
miter saw work stand on a soft surface, such
as sand or mud.
4. MITER SAW WORK STAND USAGE. Only use
the miter saw work stand to support a miter
saw. This stand is NOT intended for use as a
ladder or scaffolding.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
#13127TR
COPYRIGHT © JULY, 2010 BY WOODSTOCK INTERNATIONAL, INC.
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Figure 1. Model D4041.
5. WORKPIECE BALANCE. Use extra support
tables, or get assistance, when working with
large workpieces to prevent the stand from
tipping over.
6. ATTACH MITER SAW SECURELY. DO NOT
operate the miter saw unless it is securely
attached to the miter saw work stand.
7. LOCK WORK SUPPORTS. Tighten lock knobs
to secure the work supports before using the
miter saw work stand.
8. EXPERIENCING DIFFICULTIES. If at any time
you are experiencing difficulties performing
the intended operation, stop using this stand!
Contact Tech Support at (360) 734-3482 for
help.
Printed in China
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Shop fox SHOP FOX D4041
Summary of Contents for Shop fox SHOP FOX D4041
- Page 1 Contact Tech Support at (360) 734-3482 for help. COPYRIGHT © JULY, 2010 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
- Page 2 D4041 Miter Saw Stand Instructions Inventory In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expediency, replacements can be obtained at your local hardware store. Box Contents: (Figure 2) A.
- Page 3 D4041 Miter Saw Stand Instructions 7. Slide the roller assemblies into the crossbars and secure them with the M8-1.25 x 20 knobs (see Figure 8. Loosen the T-track lock knobs and adjust the T-tracks T-Track to the width of your miter saw, then slide the heads of two M8-1.25 x 50 hex bolts into each T-track.
- Page 4 D4041 Miter Saw Stand Instructions D4041 Parts 26 27 PART # DESCRIPTION PART # DESCRIPTION XD4041001 ROLLER XD4041018 SMALL AXLE XD4041002 SUPPORT XD4041019 RIGHT LEG XD4041003 END PLUG XD4041020 FOOT XD4041004 BUSHING XD4041021 T-TRACK LOCKING PLATE XD4041005 OUTSIDE GEAR XD4041022 BIG AXLE XD4041006 INSIDE GEAR...
Need help?
Do you have a question about the SHOP FOX D4041 and is the answer not in the manual?
Questions and answers