Electrical Safety Instructions - Shop fox W1823 Owner's Manual

Electrical Safety Instructions

These pages are current at the time of printing. However, in the spirit of improvement, we may
make changes to the electrical systems of future machines. Study this diagram carefully. If you notice
differences between your machine and these wiring diagrams, call Woodstock International Technical
Support at (360) 734-3482.
connected to a power source is extremely
dangerous. Touching electrified parts will
result in personal injury including but not
limited to severe burns, electrocution,
or death. Disconnect the power from
the machine before servicing electrical
components!
inherent hazards of electricity, only a
qualified electrician should perform wiring
tasks on this machine. If you are not a
qualified electrician, get help from one
before attempting any kind of wiring job.
be tight to prevent wires from loosening
during machine operation. Double-check all
wires disconnected or connected during any
wiring task to ensure tight connections.
wires or components increase the risk of
serious personal injury, fire, or machine
damage. If you notice that any wires or
components are damaged while performing
a wiring task, replace those wires or
components before completing the task.
The photos and diagrams
included in this section are
best viewed in color. You
can view these pages in
color at www.shopfox.biz.
Working on wiring that is
Due to the
All connections must
Damaged
BLACK BLUE
WHITE BROWN
GREEN GRAY
RED ORANGE
in these diagrams is current at the time
of printing, but it may not match your
machine. Always use the wiring diagram
inside the motor junction box.
modifying the wiring beyond what is shown
in the diagram may lead to unpredictable
results, including serious injury or fire.
and power inverters store an electrical
charge for up to five minutes after being
disconnected from the power source. To
avoid being shocked, wait at least this long
before working on these components.
follow the electrical requirements at the
beginning of this manual when connecting
your machine to a power source.
experiencing difficulties understanding
the information included in this section,
contact our Technical Support at (360) 734-
3482.
WIRING DIAGRAM COLOR KEY
YELLOW
YELLOW
GREEN
PURPLE
PINK
-30-
Model W1823 (Mfg. Since 9/10)
The motor wiring shown
Using aftermarket parts or
Some capacitors
You MUST
If you are
LIGHT
BLUE
BLUE
WHITE
TUR-
QUOISE